1RM calculator and load table
Enter the load and reps of one set to failure and see right away the estimated 1RM, the heaviest load that can be lifted for a single rep, by 8 published equations, and the load for each number of reps, from 1 to 10. Free, no sign-up.
Updated
The weight lifted in the set.
To failure, in a single set.
Shown in the report for your client.
Result
- Estimated 1RM
- Across the 8 equations
To see the result, enter: load and reps.
Are you a personal trainer? In MyFitnessClient, assessments keep your client's 1RM on the bench press, squat and deadlift, tested or estimated, and show the change from one assessment to the next.
Create a free accountFind a professionalIn short
This calculator estimates the 1RM, the heaviest load that can be lifted for one rep, from one set to failure, by 8 published equations, and gives the load for 1 to 10 reps by the same equation. On the bench press, in a study of 31 men who trained at a gym, the six equations studied, five of them in this calculator, had a standard error of 2.7 to 3.2 kg (Lacio and colleagues, 2010). But accuracy changes with the exercise: on the 45° leg press, every equation studied by Menêses and colleagues (2013) overestimated the 1RM by 6 to 15%. It does not work for sets of more than 12 reps, is more reliable up to 10 and does not replace a 1RM test.
How it's calculated
The 8 equations
Each equation estimates the 1RM from the load lifted (w, in kg or lb) and the reps done to failure in a single set (r). These are the 8 we checked in at least two peer-reviewed papers, with the author and year of each:
- Epley (1985): 1RM = w × (1 + r ÷ 30)
- Brzycki (1993): 1RM = w × 36 ÷ (37 − r)
- Lander (1985): 1RM = 100 × w ÷ (101.3 − 2.67123 × r)
- Lombardi (1989): 1RM = w × r^0.10
- Mayhew et al. (1992): 1RM = 100 × w ÷ (52.2 + 41.9 × exp(−0.055 × r))
- O'Conner, Simmons, and O'Shea (1989): 1RM = w × (1 + 0.025 × r)
- Wathen (1994): 1RM = 100 × w ÷ (48.8 + 53.8 × exp(−0.075 × r))
- Baechle and Groves (2000): 1RM = w × (0.0375 × r + 0.978)
exp(x) is the number e, about 2.718, raised to the power x, and r^0.10 is r raised to the power 0.10. With 1 rep, the 1RM is the load itself, in every equation.
The load table
The load for each number of reps comes from the same equation, inverted: if the equation says 1RM = w × f(r), the load that brings failure at r reps is the 1RM divided by f(r). The table shows that load rounded to 2.5 kg, or to 5 lb when the load is entered in lb; the math is done without rounding.
- load for r reps = 1RM ÷ f(r)
- % of 1RM = 100 ÷ f(r)
The table is calculated from the chosen equation, not copied from any published table.
How to measure
Do a single set to failure, with a load that allows up to 10 full reps, with the usual technique, and enter the load and the reps. Reynolds and colleagues (2006), with 70 adults on the bench press and leg press, concluded that no more than 10 reps should be used in linear equations, and the estimate from 5 reps was the most accurate. Count only the reps to failure: a set stopped early gives a 1RM below the real one.
Example
One set of 5 reps to failure with 100 kg on the bench press. By the Epley equation, the one the calculator shows first:
- 1RM = 100 × (1 + 5 ÷ 30) = 116.7 kg
| Epley | 116.7 kg |
|---|---|
| Brzycki | 112.5 kg |
| Lander | 113.7 kg |
| Lombardi | 117.5 kg |
| Mayhew | 119.0 kg |
| O'Conner | 112.5 kg |
| Wathen | 116.6 kg |
| Baechle and Groves | 116.6 kg |
The 8 equations give between 112.5 kg and 119.0 kg. To track someone's progress, always use the same one.
| Reps | % of 1RM | Load |
|---|---|---|
| 1 | 100% | 116.7 kg |
| 2 | 94% | 110 kg |
| 3 | 91% | 105 kg |
| 4 | 88% | 102.5 kg |
| 5 | 86% | 100 kg |
| 6 | 83% | 97.5 kg |
| 7 | 81% | 95 kg |
| 8 | 79% | 92.5 kg |
| 9 | 77% | 90 kg |
| 10 | 75% | 87.5 kg |
By the Epley equation, rounded to 2.5 kg.
More about the calculator
The percentage of 1RM at which, according to each equation, failure comes at 2, 5, and 10 reps. From 2 to 10 reps, the highest and the lowest of the 8 are 4.5 to 7.5 points apart.
| Equation | 2 reps | 5 reps | 10 reps |
|---|---|---|---|
| Epley | 94% | 86% | 75% |
| Brzycki | 97% | 89% | 75% |
| Lander | 96% | 88% | 75% |
| Lombardi | 93% | 85% | 79% |
| Mayhew | 90% | 84% | 76% |
| O'Conner | 95% | 89% | 80% |
| Wathen | 95% | 86% | 74% |
| Baechle and Groves | 95% | 86% | 74% |
- Epley B (1985). Poundage chart. In: Boyd Epley Workout. Lincoln, NE. The link opens Lin et al. (2021), where the equation was read.
- Brzycki M (1993). Strength testing: predicting a one-rep max from reps-to-fatigue. J Phys Educ Recreat Dance 64(1):88-90.
- Lander J (1985). Maximum based on reps. Natl Strength Cond Assoc J 6(6):60-61.
- Lombardi VP (1989). Beginning weight training: the safe and effective way. Dubuque, IA: Wm. C. Brown. The link opens Lin et al. (2021), where the equation was read.
- Mayhew JL, Ball TE, Arnold MD, Bowen JC (1992). Relative muscular endurance performance as a predictor of bench press strength in college men and women. J Appl Sport Sci Res 6(4):200-206.
- O'Conner B, Simmons J, O'Shea P (1989). Weight training today. St. Paul, MN: West Publishing. The link opens Lin et al. (2021), where the equation was read.
- Wathen D (1994). Load assignment. In: Baechle TR, ed. Essentials of Strength Training and Conditioning. Champaign, IL: Human Kinetics. The link opens Lin et al. (2021), where the equation was read.
- Baechle TR, Groves BR (2000). Treinamento de força: passos para o sucesso. Porto Alegre: Artmed. The link opens Menêses et al. (2013), where the equation was read.
- LeSuer DA, McCormick JH, Mayhew JL, Wasserstein RL, Arnold MD (1997). The accuracy of prediction equations for estimating 1-RM performance in the bench press, squat, and deadlift. J Strength Cond Res 11(4):211-213.
- Lin TY, Hsieh SS, Chueh TY, Huang CJ, Hung TM (2021). The effects of barbell resistance exercise on information processing speed and conflict-related ERP in older adults: a crossover randomized controlled trial. Sci Rep 11:9137.
- Lacio ML, Damasceno VO, Vianna JM, Lima JRP, Reis VM, Brito JP, Fernandes Filho J (2010). Precisão das equações preditivas de 1-RM em praticantes não competitivos de treino de força. Motricidade 6(3):31-37.
- Menêses AL, Santana FS, Soares AHG, Souza BCC, Souza DJCA, Santos MAM, Cyrino ES, Ritti-Dias RM (2013). Validade das equações preditivas de uma repetição máxima varia de acordo com o exercício realizado em adultos jovens treinados. Rev Bras Ativ Fis Saúde 18(1):95-104.
- Reynolds JM, Gordon TJ, Robergs RA (2006). Prediction of one repetition maximum strength from multiple repetition maximum testing and anthropometry. J Strength Cond Res 20(3):584-592.
- Bishop DJ, Beck B, Biddle SJH, Denay KL, Ferri A, Gibala MJ, Headley S, Jones AM, Jung M, Lee MJ-C, Moholdt T, Newton RU, Nimphius S, Pescatello LS, Saner NJ, Tzarimas C (2025). Physical activity and exercise intensity terminology: a joint American College of Sports Medicine (ACSM) expert statement and Exercise and Sport Science Australia (ESSA) consensus statement. Med Sci Sports Exerc 57(11):2599-2613.
See also
Heart rate calculator
Maximum heart rate by 6 equations (Tanaka, Fox, Gulati, and others) and the ACSM zones in bpm, by HRmax and by heart rate reserve (Karvonen).
Assessments
Measurements, skinfolds, bioimpedance and fitness tests, plus photos and videos from Basic up, with BMI, estimated body fat and assessment comparisons.